1. All Products
  2. Fencing Equipment
46 results
Sort by:
Show per page
  • POST HOLE DIGGER LESS AUGER

    Part number GMR300

    POST HOLE DIGGER LESS AUGER

    GMR 300is designed to fit most 14-24 horsepower tractors equipped with a Category 0 - 3 point hitch and a 540 rpm PTO.
    It fits the 16 HP Kubota Model B7100. Capable of handling 6", 9" and 12" diameter standard duty 30" length augers, this 3 position boom allows the unit to fit a variety of tractor models.
    A lever is provided for the operatorto adjust the auger starting angle
    The gearbox has a 3:1 gear ratio and is protected by the shear-pin PTO drive. The gearbox features tapered roller bearings and spring loaded seals and has a 5 year limited warranty. Built for years of trouble-free work with a minimum amount of maintenance.

    NOTE: Most tractors of this size have lift arms made of ? inch diameter, Category I pins, but with the 20 inch Category 0 spacing. Tractors with very short lift arms made for 5 /8 inch diameter pins may not be suitable for digging post holes. (Special ? inch diameter pins are available for those tractors that can handle the post hole digger).
    Auger Size: 6" - 12"
    (F) HP or GPM Up to 25 (F) HP

    $1,416.86
    Add to Wish List
  • Heavy Duty POST HOLE DIGGER LESS AUGER

    Part number GMR720

    Heavy Duty POST HOLE DIGGER LESS AUGER

    GMR 720 Heavy Duty post hole digger easily handles augers from 6" to 24" with 2" inside diameter opening. A three position boom adjustment allows for maximum auger use. Constructed of heavy duty steel materials, the GMR 720 is designed for years of work.

    $1,843.57
    Add to Wish List
  • 12

    Part number GMR170570

    12" X 30" AUGER

    GMR is designed to fit most 14-24 horsepower tractors equipped with a Category 0 - 3 point hitch and a 540 rpm PTO.
    It fits the 16 HP Kubota Model B7100. Capable of handling 6", 9" and 12" diameter standard duty 30" length augers, this 3 position boom allows the unit to fit a variety of tractor models.
    A lever is provided for the operatorto adjust the auger starting angle
    The gearbox has a 3:1 gear ratio and is protected by the shear-pin PTO drive. The gearbox features tapered roller bearings and spring loaded seals and has a 5 year limited warranty. Built for years of trouble-free work with a minimum amount of maintenance.

    NOTE: Most tractors of this size have lift arms made of ? inch diameter, Category I pins, but with the 20 inch Category 0 spacing. Tractors with very short lift arms made for 5 /8 inch diameter pins may not be suitable for digging post holes. (Special ? inch diameter pins are available for those tractors that can handle the post hole digger).
    Auger Size: 12" x 30"

    $332.38
    Add to Wish List
  • 12

    Part number GMR170720

    12" Standard Duty Single Flight Auger with teeth.

    12" Standard Duty Single Flight Auger with teeth. 2" ID Round with 42" useable flighting length.
    Auger Size: 12" x 42"

    $332.38
    Add to Wish List
  • 6

    Part number GMR170585

    6" X 42" AUGER

    6" Standard Duty Single Flight Auger w/teeth.
    2" ID round with 42" useable flighting length.

    $316.17
    Add to Wish List
  • 6

    Part number GMR706150

    6" x 42" AUGER

    6" Heavy Duty Single Flight Auger w/teeth.
    2" ID round with 42" useable flighting length.

    $356.71
    Add to Wish List
  • 6

    Part number GMR170575

    6" X 30" AUGER

    GMR 300is designed to fit most 14-24 horsepower tractors equipped with a Category 0 - 3 point hitch and a 540 rpm PTO.
    It fits the 16 HP Kubota Model B7100. Capable of handling 6", 9" and 12" diameter standard duty 30" length augers, this 3 position boom allows the unit to fit a variety of tractor models.
    A lever is provided for the operatorto adjust the auger starting angle
    The gearbox has a 3:1 gear ratio and is protected by the shear-pin PTO drive. The gearbox features tapered roller bearings and spring loaded seals and has a 5 year limited warranty. Built for years of trouble-free work with a minimum amount of maintenance.

    NOTE: Most tractors of this size have lift arms made of ? inch diameter, Category I pins, but with the 20 inch Category 0 spacing. Tractors with very short lift arms made for 5 /8 inch diameter pins may not be suitable for digging post holes. (Special ? inch diameter pins are available for those tractors that can handle the post hole digger).
    Auger Size: 6" x 30"

    $316.17
    Add to Wish List
  • POST HOLDER ASSEMBLY

    Part number GMR815130

    POST HOLDER ASSEMBLY

    Fits Worksaver hydraulic post drivers previously manufactured without post holders. Spring loaded, holds post in position until post is started. Not for “T” posts.

    $340.49
    Add to Wish List
  • 3 Point Hydraulic POST HOLE AUGER

    Part number GMR614HC

    3 Point Hydraulic POST HOLE AUGER

    Ability to reverse the auger should it become entangled in roots or rocks.
    No need to replace shear-bolts or repair slip clutches as required on PTO operated units.
    No PTO lifting restrictions with tractor, loader, or backhoe boom.
    Models ending with “14HC” are designed for 5–10 gpm @ 1500–3000 PSI hydraulic systems.
    3 point Hydraulic (includes hoses) (use 6"–14" augers)
    Auger Size: 6" - 14"
    (F) HP or GPM 5 - 10 (F) GPM

    $3,461.99
    Add to Wish List
  • HYD DIGGER LESS HOSES/AUGER

    Part number GMR724HC

    HYD DIGGER LESS HOSES/AUGER

    The GMR 714HC and GMR 724HC will attach to backhoe booms or excavators to allow an operator to reach hard to get to places. These units also attach to either side of a loader bucket with four ½" bolts for an unobstructed view of the digging operation.
    Auger Size: 6" - 24"
    (F) HP or GPM 10 - 20 (F) GPM

    $3,226.24
    Add to Wish List
  • SKID STEER DIGGER LESS AUGER

    Part number GMR914HC

    SKID STEER DIGGER LESS AUGER

    Universal” skid steer mount.
    Hydraulically driven.
    Requires 5–10 gpm @ 1,500–3,000 PSI.
    For tractor front loaders with “Universal” skid steer mount.
    Handles augers 6" to 24" with 2" inside diameter opening
    No hoses included.
    Hydraulic operation allows user to reverse the auger to clear obstructions.
    Counter weight provides constant balance for true vertical holes.
    Auger Size: 6" - 14"
    (F) HP or GPM 5 - 10 (F) GPM

    $3,282.82
    Add to Wish List
  • Manual Adjust, 3 Pt.
Hydraulic Post Driver

    Part number GMRHPD16

    Manual Adjust, 3 Pt. Hydraulic Post Driver

    The HPD-16 model with manual adjust quickly delivers a tight post set for wood or steel posts. Base model offers manual adjustment cranks and bubble level for perfect vertical alignment on flatland or hillsides. Transport lock pin secures unit for travel and storage. Greaseable pivot points provide reliable movement of the driver.

    Max. Post Size: 5” x 9’
    Impact at Full Stroke: 32,000 lbs.
    Impact at Half Stroke: 16,000 lbs.
    Mount Type: 3-pt. Cat I/II
    Tilt Adj. Front/Back: 10° each way
    Tilt Adj. Side/Side: 17° each way
    Manual Adjust: Yes
    Stabilizer Legs: Standard
    Slide Blocks Material: Nyrim
    Spring Post Holder: Standard
    Min. Tractor Size: 20-22 hp
    Rear Hitch Category: Cat. I or II
    Min. Hydraulic Req.: 3-4 GPM
    QuickChange Rod Seal: Yes
    Q-springs: N/A
    Valve(s) Sgl.: Spool
    Hoses less couplers: Standard

    $6,039.92
    Add to Wish List
  • Skid Steer Mount Post Driver, Hydraulic Adjustment

    Part number GMRHPD16HSS

    Skid Steer Mount Post Driver, Hydraulic Adjustment

    Worksaver GMR HPD16 post drivers for skid steers help you work with these small compact workhorses. Gives you greater range for front and rear angle adjustment.

    Enables you to maneuver into tight areas that farm tractors may not be able to navigate.

    Adjustable stabilizer legs provide solid footing.

    For Case/IH, John Deere, New Holland, Bobcat, Gehl, Mustang and other brands.

    Special return line fittings and hoses solve return line problems; help prevent dirt contamination of hydraulic oil.

    $12,233.07
    Add to Wish List