1. All Products
  2. Pumps
1725 results
Sort by:
Show per page
  • 4300-042A  FLOJET MPU 115V S/E

    Part number SPP4300-042A

    4300-042A FLOJET MPU 115V S/E

    Pump and Motor unit, 115 Volt, 3.5 Gpm, 45 Psi (max). Pse C/w Pressure Switch.

    $345.64
    Add to Wish List
  • DELAVAN 6 Roller Pump Kit DPK-6900C

    Part number SPWWP6RC

    DELAVAN 6 Roller Pump Kit DPK-6900C

    This 6 roller pump kit contains a cast iron pump, quick coupler, torque bar and chain to allow for quick attach to a PTO shaft. Delivers up to 19.5 GPM and 300 PSI.

    $341.00
    Add to Wish List
  • Shurflo 8000 Series Diaphragm Pumps 8001-248-250

    Part number SPTP8001-248-250

    Shurflo 8000 Series Diaphragm Pumps 8001-248-250

    The 8000 Series diaphragm pump is Shurflo®'s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    Pressures up to 150 PSI [10.3 BAR]
    Self-Priming up to 8 Vertical Feet [2.4M]
    Chemically Resistant Materials
    Designed for Spraying and Fluid Transfer
    Can Run Dry without Damage
    Built-In Check Valve
    Supported for agriculture

    $184.67
    Add to Wish List
  • High Flo High Performance Pump 2.4 GPM 60 PSI

    Part number SPF5151087

    High Flo High Performance Pump 2.4 GPM 60 PSI

    The High Flo High Performance 2.4 GPM 12 Volt Demand Pump sets the standard for electric pumps.  With 60 PSI maximum pressure, this self-priming pump delivers increased flows rates and longer pump life. An integrated demand switch automatically shuts off at maximum pressure.  Featuring inline fuse protection, chemical resistant elastomers, quick attach port fittings, fan cooled motor and ball bearing drive makes this Performance Series Pump durable enough to run dry without damage. Combined with a Best in Class 2 Year Warranty, the High Flo pump is built for years of trouble free service.

    $176.28
    Add to Wish List
  • High Flo High Performance Pump 4.5 GPM 60 PSI

    Part number SPF5151088

    High Flo High Performance Pump 4.5 GPM 60 PSI

    The High Flo High Performance 4.5 GPM 12 Volt Demand Pump sets the standard for electric pumps. With 60 PSI maximum pressure, this self-priming pump delivers increased flows rates and longer pump life. An integrated demand switch automatically shuts off at maximum pressure. Featuring inline fuse protection, chemical resistant elastomers, quick attach port fittings, fan cooled motor and ball bearing drive makes this Performance Series Pump durable enough to run dry without damage.

    FEATURES

    • 12 Volt 4.5 GPM pump can pump up to 60 PSI and features an internally fan cooled motor which delivers consistent performance under heavy load
    • Chemically resistant elastomers provide increased flow rate delivering superior performance
    • Features built in check valves which help maintain pressure and prevent backflow
    • Replaces pump part numbers 5281372, 5275088, 5277982, 5275704, 5275498, 5274983 and 5275017
    • Running dry will not damage pump or limit reliability

    $237.68
    Add to Wish List
  • 8007-543-850  PUMP

    Part number SPP8007-543-850

    8007-543-850 PUMP

    The 8000 Series diaphragm pump is Shurflo®'s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    Pressures up to 150 PSI [10.3 BAR]
    Self-Priming up to 8 Vertical Feet [2.4M]
    Chemically Resistant Materials
    Designed for Spraying and Fluid Transfer,
    Can Run Dry without Damage
    Built-In Check Valve
    Supported for agriculture

    $198.36
    Add to Wish List
  • 9910-D250  PUMP

    Part number SPP9910-D250

    9910-D250 PUMP

    This low pressure, epoxy coated 6 diaphragm pump achieves a max of 65.7 gpm (248.7 lpm) and a max of 290 psi (20 bar).
    Mounting base: included
    Pump shaft rotation: CW and CCW
    Recommended control unit: 3300-0082

    $3,056.42
    Add to Wish List
  • FMC-150-HYD-206 Hydraulic Motor Driven Centrifugal Pump

    Part number SPPFMC-150-HYD-206

    FMC-150-HYD-206 Hydraulic Motor Driven Centrifugal Pump

    • Suction 1-1/2” Discharge 1-1/4”
    • Recommended for use on the following Hydraulic Systems: Pressure Compensating Closed Center, Load Sensing or Pressure Flow Compensating Closed Center, Open Center up to 16 GPM (60 LPM)
    • Integral Needle Valve bypasses up to 9 GPM (34 LPM) on Open Center Systems
    • Standard Viton® Carbon/Ceramic seal or Optional Severe Duty Silicon Carbide Mechanical Seal
    • Chemical Resistant Valox® or Optional Cast Iron or Polypropylene Impeller
    • Stainless Steel Shaft and Wear Ring

    $1,576.57
    Add to Wish List
  • 9303C-HM1C HYPRO hydraulic centrifugal pump

    Part number SPP9303C-HM1C

    9303C-HM1C HYPRO hydraulic centrifugal pump

    The Hypro 9303C Series hydraulic motor driven cast iron centrifugal pump achieves a max of 147gpm and 145psi.

    • Hydraulic motor drive (for open center, closed center and load-sensing systems)
    • Max. fluid temperature: 140°F/60°C
    • Impeller: Nylon
    • Motor: internal gear gerotor
    • Pump seals: Viton® /ceramic standard
    • Hydraulic motor seal: double-lip Teflon®
    • Weight: 26 lbs./11.8 kg

    $1,775.51
    Add to Wish List
  • 9303C-HM4C HYPRO hydraulic centrifugal pump

    Part number SPP9303C-HM4C

    9303C-HM4C HYPRO hydraulic centrifugal pump

    The Hypro 9303C Series hydraulic motor driven cast iron centrifugal pump achieves a max of 147gpm and 145psi.

    • Hydraulic motor drive (for open center, closed center and load-sensing systems)
    • Max. fluid temperature: 140°F/60°C
    • Impeller: Nylon
    • Motor: internal gear gerotor
    • Pump seals: Viton® /ceramic standard
    • Hydraulic motor seal: double-lip Teflon®
    • Weight: 26 lbs./11.8 kg

    $1,775.51
    Add to Wish List
  • 9306C-HM1C Centrifugal Pump

    Part number SPP9306C-HM1C

    9306C-HM1C Centrifugal Pump

    The Hypro 9306 C + S Series hydraulically-driven, cast iron and stainless steel centrifugal pump achieves a max of 214 gpm (810 lpm) and max of 140 psi (9.6 bar).

    • Hydraulic motor drive (for open center, closed center and load-sensing systems)
    • Max. fluid temperature: 140°F/60°C
    • Available in cast iron and 316 stainless steel for extended pump life
    • Impeller: Nylon (cast iron models); polypropylene (stainless steel models); (GTX available)
    • Motor: internal gear gerotor
    • Hydraulic ports: 1/2" NPT inlet, 3/4" NPT outlet
    • Max. motor psi: 3000 (bar: 207)
    • Pump seals: Cast Iron models – Viton® /ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models – Life Guard silicon carbide standard
    • Hydraulic motor seal: double-lip Teflon®
    • Weight: 33 lbs./15 kg

    $2,059.58
    Add to Wish List
  • 9306C-HM5C Centrifugal Pump

    Part number SPP9306C-HM5C

    9306C-HM5C Centrifugal Pump

    The Hypro 9306 C + S Series hydraulically-driven, cast iron and stainless steel centrifugal pump achieves a max of 214 gpm (810 lpm) and max of 140 psi (9.6 bar).

    • Hydraulic motor drive (for open center, closed center and load-sensing systems)
    • Max. fluid temperature: 140°F/60°C
    • Available in cast iron and 316 stainless steel for extended pump life
    • Impeller: Nylon (cast iron models); polypropylene (stainless steel models); (GTX available)
    • Motor: internal gear gerotor
    • Hydraulic ports: 1/2" NPT inlet, 3/4" NPT outlet
    • Max. motor psi: 3000 (bar: 207)
    • Pump seals: Cast Iron models – Viton® /ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models – Life Guard silicon carbide standard
    • Hydraulic motor seal: double-lip Teflon®
    • Weight: 33 lbs./15 kg

    $2,059.58
    Add to Wish List
  • 4001C HYPRO 4 ROLLER PUMP

    Part number SPP4001C

    4001C HYPRO 4 ROLLER PUMP

    Pentair Hypro 4001 Series 4 Roller Pump. The 4001 series, 4-roller, pump achieves up to 9.1 gpm (34.4 lpm) and 150 psi (10.3 bar). The series includes models 4001C, 4001N, and 4001XL.

    $336.79
    Add to Wish List
  • SHURFLO® 2088-313-145 12VDC Diaphragm Pump w/ Fin Cooled Motor

    Part number SPP2088-313-145

    SHURFLO® 2088-313-145 12VDC Diaphragm Pump w/ Fin Cooled Motor

    Shurflo 2088 Series diaphragm pumps deliver reliable performance in high flow, moderate pressure applications. They are used in a variety of spot spraying, multi-nozzle spraying and fertilizer drip applications that require flows of up to 3.6 GPM [13.6 L/min].

    They are available in a variety of chemical-resistant materials.

    • Self-priming up to 12 vertical feet [3.7m]
    • Chemical-resistant materials
    • Can run dry without damage
    • Automatic demand
    • Built-in check valve (varies by model) prevents back flow of fluid into the solution tank
    • Continuous duty motor on fin-cooled version

    $413.48
    Add to Wish List